Industrial Applications

Reinforced paraffin-based hydraulic lubricants, high viscosity index and low flow point. Suitable for closed traffic systems.

High-performance paraffin-based hydraulic lubricants, reinforced with special additives for maximum protection against wear and corrosion. Suitable for use in industrial and marine hydraulic systems, as well as in hydraulic car circuits. Particularly effective for high pressure hydraulic systems.

Hydraulic systems lubricants free of zinc. Suitable for use in industrial and marine hydraulic systems of high pressure and in general systems operating in conditions with a high probability of water contamination.

High-quality hydraulic hydraulic lubricants and viscosity index, designed to operate in a wide range of temperatures and provide complete protection of the metal parts of the mechanism. Suitable for industrial and marine hydraulic systems subject to abrupt temperature changes.

Special non-flammable water-based hydraulic fluid - glycol (HFC class). It has excellent antioxidant, anti-corrosion behavior and resistance to high pressures. Suitable for steel mills, metallurgical plants, mines.

100% synthetic, non-flammable hydraulic lubricant, based on organic esters and selected additives (HFD category). It is specially designed to prevent the flame from exploding, igniting and spreading either by direct contact of the lubricant with it or by a hot surface. Suitable for steel mills, metallurgical plants, mines.

Special lubricants of high oxidative stability for vapor and gas turbine lubrication. Also suitable for lubrication of turbochargers and traffic systems that are not subject to heavy loads.

Naphthenic base lubricant for refrigerant compressors used as refrigerant freon R-12, R-22, R-502.

Fully synthetic base lubricant (alkyl-benzene) refrigeration machines, with very low flow point. Suitable for compressors with exhaust temperatures less than -45. C. Recommended for rotary or reciprocating compressors used as refrigerant, freon R-12, R-22, R-502 and ammonia. Also suitable for compressors used as CO2 or R134A refrigerant.

High-performance, fully synthetic lubricants for multi-oleo-ester (ROE) refrigerant coolers. They are suitable for new types of coolant hydrofluorocarbons (HFC) R134a, R404a, R407c, R410a / b, etc. as well as older technology R12, R22 and R502 used in domestic or industrial applications.

Lubricants for gear wheels lubricated by immersion or circulation and strong charged. They are also used as lubricants for other strained components, such as joints, load-bearing bolts and bearings.

Poly-alpha-olefin synthetic lubricants, suitable for industrial gearbox lubrication. They provide a very high level of protection against wear on bearings and gears in high load conditions.

Synthetic lubricants (poly-alkyl-glycol) for lubricating grease containers and circulating systems operating on a wide range of temperatures. It is highly recommended for wind turbine transmission systems.

Special lubricants suitable for lubrication of rollers and bearings of reciprocating air compressors. They provide complete protection of metal parts from corrosion and rust.

Synthetic poly-alpha-olefin (SPO) base lubricants for the lubrication of centrifugal, screw, rotary air compressors. They keep pipes, fins and heat exchangers clean of dangerous carbon deposits, thus reducing maintenance costs.

Fully synthetic ester base lubricants for reciprocating air compressor lubrication subject to continuous high pressures and temperatures> 220. C.

Fully synthetic (poly-alkyl-glycol) compressor lubricant. Intended for use in closed type compressors operating in liquefied petroleum gas, natural gas and other chemical gases.

Lubricants with anti-wear additives and special adhesives for strong adhesion to vertical lubricated surfaces. Suitable for lubrication of machine tools and sliders.

Naphthenic base transformer lubricant without additives. It provides excellent insulation to transformers and excellent oxidation resistance.

Air lubricants such as drills and rock crushing tools of various applications. Effective lubrication in high pressure conditions and with the presence of water in the lubricant.

Emulsified metal lubricant. Recommended use ratio 25: 1 and 50: 1.

Lubricant for heat transfer systems operating at temperatures from 10 ° C to 320. C. It has a high heat transfer coefficient and is highly resistant to oxidation.