AVIN FRIO SYN 68

Synthetic lubricants with a low flow point, suitable for compressors of cooling systems with evaporating temperatures lower than –45 °C. Recommended for rotary or reciprocating compressors which use CFC, FREON R-12, R-22, R-502 and ammonia as cooling agents.

Meet the following specifications:

DIN 51503 KA/KC, BS 2626/92

AVIN FRIO 68

Naphthenic-base mineral oils manufactured for compressors of cooling equipment which use FREON R-12, R-22, R-502 as cooling agent

Meet the following specifications:

DIN 51503 KA/KC, BS 2626/77

TURBINE OIL ISO 32, 46, 68, 100

Special mineral oils for the lubrication of turbines. Approved by the American Navy, in adherence to specifications: MIL-L-17331 H (SH), DIN-51515 L-TD.

HYDROL OIL HFC 46 | HYDROL OIL HFD 46, 68

HYDROL OIL HFC 46

Special synthetic, non-flammable, water - glycol hydraulic lubricant(class HFC). Excellent antioxidant, anti-corrosion behaviour and resistance to high pressures. Suitable for the steel industry, metallurgical factories, mines.

HYDROL OIL HFD 46, HYDROL OIL HFD 68

100% synthetic, non-flammable hydraulic lubricant, based on organic esters and selected additives (class HFD). Specially designed to avoid explosion, ignition and flame spread, either via direct contact with the lubricant or via a hot surface. Suitable for the steel industry, metallurgical factories, mines.

HYDRAULIC SPECIAL ISO 32, 46, 68, 100, 150, 220

High quality, reinforced mineral oils for hydraulic systems, with a high viscosity index, designed to withstand a wide range of temperatures and provide full protection of the metal parts of the mechanism.

Meet the following specifications:

AFNOR NF-E-48603 HM-HV, DIN-51524 part 3, HVLP, MIL-L-24459, DENISON HF-2, HF-0, VICKERS M-2950-S, CINCINNATI M P-68-69-70, AGMA 250.03

HYDROL OIL ZNF ISO 46, 68, 100

Mineral oils for hydraulic systems, free of zinc and chlorine. Suitable for systems operating in harsh conditions.

Meet the following specifications:

DIN-51524 part 2, HLP, DENISON HF-2, HF-0, CINCINNATI M P-68-69-70, VICKERS M-2950-S.

HYDROL OIL ISO 220, 320, 460

Mineral oils for high quality hydraulic systems, reinforced with special additives for increased anti-corrosion protection.

Meet the following specifications:

AFNOR NF-E-48603 HM, DIN-51524 part 2, HLP, MIL-L-24459, DENISON HF-2, HF-0, VICKERS M-2950-S, CINCINNATI MIL P-68-69-70, AGMA 250.03

HYDROL OIL ISO 22, 32, 46, 68, 100, 150

Mineral oils for high quality hydraulic systems, reinforced with special additives for increased anti-corrosion protection.

Meet the following specifications:

AFNOR NF-E-48603 HM, DIN-51524 part 2, HLP, MIL-L-24459, DENISON HF-2, HF-0, VICKERS M-2950-S, CINCINNATI MIL P-68-69-70, AGMA 250.03

LEDA OIL ISO 46, 68, 100

Pure mineral oils with a high viscosity index and low flow point. Suitable for closed circulatory systems.

CALCIUM GRAVIN PLEX NLGI-2

Calcium complex-based grease, with excellent mechanical stability, resistant to water rinsing and high pressures. Recommended for the long-term lubrication of applications performed in high temperatures and with the presence of water, in the steel industry, mines, shipyards and construction sites.

Meets the following specifications:

DIN 51826, ΚP2, P-20